OFFERS

Assistance for a Winding cable machine

Request a quote

Connect with Loimex

To learn more about our products and capabilities, or to get in touch with a Loimex representative, contact us today.

CONTACT US


 
Reeling and coiling machines TR167  
Reeling and coiling machines

This combined reeling-coiling machine allows one single operator to measure, rewind and cut cable from the reel racks warehouse or from a reel-carrying jacks to an empty reel, and also to make coils with an additional coiling device.

Each machine is built according to the European Norm of Security for Machinery and is marked with the CE label

Range of application
  • Electrical cables, unsheathed or sheathed, ropes, etc. from 1 to 100 mm Ø.
  • Steel wire ropes Ø 1 to 55 mm.
  • Reels from 700 to 1600 mm Ø.
  • Maximum weight 2000 Kg
Placement for take-up
The wooden reel or drum is situated inside the machine, between the two axles with cones which will support it. One of the axles is operated manually and is blocked by a ratchet lever which is easy to use and very fast. The other axle is hydraulically actuated by a pad located in the cage protection of the machine, perfectly situated to be able to move the reel while the shaft moves
Features
  • Built in a sturdy steel frame, with optional steering wheels.
  • The lifting and lowering of the reel by hydraulic means
  • Direct transmission to the axis
  • Coiler device can be attached directly to the motor drive arm.
  • Hydraulic drive shaft for the drive arm
  • Right axis ratchet, for an useful drum width of 450 mm
  • Measurement and controls with touch screen 5.7" C
  • Slow ramp and adjustable speed regulator with the use of a frequency inverter.
  • Safety cage with automatic switch lock following the CE securities directive
TR147
TR167
TR207
Drum/Reel
Ø mm minimum 600 700 700
Ø mm maximum 1400 1600 2000
minimum width mm 300 450 520
maximum width mm 950 1150 1150
Maximun weight kg. 1500 2000 3000 / 4000
(L x W x H) cage opened
Speed ( R.P.M.) 15-80 15-80 10-60
Power kW (HP) 2,2 (3) 3,0 (4) 5.5 (7.5) / 7.5 (10)
Torque Nm. 511 673 1208 / 2204
Voltage (V / Hz) 230/50-60 400/50-60 (opt. 220III) 400/50-60 (opt. 220III)
Fusing 1x20 A+N 3X20 A+N 3x32 A+N
Dimensions 1996x2295 x1800 mm 2100x1900x1850 mm 2400x3100x1900 mm
(L x W x H) cage opened 1925x2295x2030 mm 2.000x2.240x2.310 mm. 2.565x2.990x2.320 mm
Weight Kg 700 800 1.200

 

Optionals

Cable length measuring
Cable length measuring equipment must offer accurate measurements, both for the cable supplier and for the customer.
Cable cutters
The cable cutters are integrated in the cable meter and facilitate the use of the same in the machine, providing greater safety and quality in the cable cut. Depending on the meter and the type of cable to be cut, there are different solutions for coupling the meter.
Counters
 CD-TOUCH-NB5touch panel counter, 5.7inches for machines type D and 7 series
 CD-TACTIL-57Ctouch panel counter, 5,7inches for machines type serie 6
 CD-TOUCH-MID3Counter conforms MID homologation
Cable traverse layering
 REL37for automatically lay the cable on the drum (900Nm)
 BRT80to guide the cable in type TR machines, 80mm Ø
 BRT60to guide the cable in type TR machines, 40mm 6
 BR-LPLaser pointer to help to wind the cable
Head coilers devices
 RT8.20for making coils of cable, width 90-200mm / 800mm Ø
 RT9.25for making coils of cable, width 100-250mm / 900mm Ø
 RT10.25for making coils of cable, width 100-250mm/1000mm Ø
Machine movement
 AC90for moving manually the machine
 AC100HIone wheel elevation and manual translation
 AC200HI/TMeasy to move the machine with motorized wheels
 TR7-SD110Accesorio para bobinas pequeñas