LOIMEX Gantry type coiling machines Gantry type coiling machines

Automatic take-up machine to fill reels and make coils with flexible or semirigid electrical cable. With a robust, compact and agile design to reduce displacement times, with quick, accurate mechanisms which reduce preparation times

Regarding TRG winding type machines, this version can exceed the 5 tons limitations from the TRG, by using vertical telescopic arms. This machine is fully recommended for manufacturers and heavy industrial use.

All the machine movements are made electrically or hydraulically, without any effort on behalf of the operator.

Range of use:
  • Cables and similar from 1 to 100 mm de .
  • Wire rope 1 to 55 mm.
  • Wooden drums from 700 hasta 2 200 mm .
  • Maximum weight 6 000 kg
 

OFFERS

Assistance for a Winding cable machine

Request a quote

Connect with Loimex

To learn more about our products and capabilities, or to get in touch with a Loimex representative, contact us today.

Contact us


 
Gantry type coiling machines TRP6  

Automatic take-up machine to fill reels and make coils with flexible or semirigid electrical cable. With a robust, compact and agile design to reduce displacement times, with quick, accurate mechanisms which reduce preparation times

Regarding TRG winding type machines, this version can exceed the 5 tons limitations from the TRG, by using vertical telescopic arms. This machine is fully recommended for manufacturers and heavy industrial use.

All the machine movements are made electrically or hydraulically, without any effort on behalf of the operator.

Range of use:
  • Cables and similar from 1 to 100 mm de .
  • Wire rope 1 to 55 mm.
  • Wooden drums from 700 hasta 2 200 mm .
  • Maximum weight 6 000 kg
Placement for take-up
The reel is placed between the arms, which move hydraulically to grasp it and elevate it. These movements are carried out through buttons located on the front of the machine, allowing us to see the positioning is correct, or through the touchscreen on the main control panel
Features
  • Sturdy frame construction.
  • Hydraulic lifting and lowering
  • Motorized hydraulic axle
  • Automatic opening and closing of the center sleeves.
  • Protection cages automatically opens and closes with safety
  • Measurement and controls with a touch screen 7" C
  • ERP cut orders transferred through network connection
  • Gentle start, infinitely adjustable, frequency controlled drive.
  • Safety cage with automatic switch-off following CE securities directive.
TRP6
TRP10
Drum
mm minimun 700 1 300
exterior mm 2 200 2 800
minimun width mm 660 660
Maximum width mm 1 500 1 650
Maximum weight 6 000 kg 10 000 kg
Collapsible coiling device
Drum RT10.25  RT10.25 
Drive
Power kW (HP) 10 Kw 11 Kw
Speed ( R.P.M.) 15-60 10 - 50
Fusing 3x32A 3x40A

 

Optionals

TRP-PU
desk for measurer or cable guide layering
Bridge frame for installing a measurer with automatic cable layering or just a layering system to guide de cable.
REL50
for automatically lay the cable with belt transmision for TRG & TRP
Highly precise and easy to manage mechanism that serves to automatically distribute the cable during winding.
RP10.25
for making coils of cable in machines TRP with width 90-250mm / 1000mm
This coiler device enables to wind coils of cable without using a wooden drum, build with a front and rear cross piece with four blades and a hub with four sectors.
Made to easily tie the coil and to remove the coil of cable effortless
CD-DSK-PCTACTIL7
desktop with touch control screen and optional computer
Desktop frame installed outside the machine for security, to add a screen monitor for connecting to a computer or for camera overview. And touch panel interface PLC counter to control the machine operations.
TRP-SU6.25
Support for raising the gantry machine
Optional support for raising the TRP6 and DVP6, which raises de portal higher, this will enable to use bigger drums from 900mm to 2500mm
AC360
cones for small drums